BROKK HIRE

Specialist BROKK hire with or without a driver.

Active has an extensive fleet of Brokks ranging from the 1000kg 100 to the mighty 5000kg 500 with a pulverising capability of 600mm and the hammering power of an 18 tonne excavator.

BROKK HIRE SPECIFICATIONS

Active Environmental offers specialist BROKK hire with or without a driver. Hammer and muncher attachments are also available. Active has an extensive fleet of Brokks ranging from the 1000kg 100 to the mighty 5000kg 500 with a pulverising capability of 600mm and the hammering power of an 18 tonne excavator.

With a range of different sizes available, you can choose the right piece of machinery to suit the required job. The compact size of the smaller Brokk makes them perfect for fitting into tight spaces, where other machinery would fail to do so.

Munching concrete generates very little noise and gives the additional benefit of minimal or no vibration, therefore creating far less risk of any structural damage occurring. With the ability to manoeuvre on rubber or metal tracks, the Brokk can cope with all terrains including stairs and access through openings as small as 800mm wide.

Active’s Brokk plant could help improve your efficiency levels and offers the ultimate when it comes to health and safety.

Powered Electrically: The Brokk allows work to proceed in confined or hazardous areas without the emission of harmful fumes and means full compliance with NRMM regulations. The Brokk provides an environmentally friendly option.

Power: Despite its compact size, Brokk machines can outperform excavators five times as big. Brokk machinery makes light work of heavy-duty demolition, the plant is durable and works at higher speeds.

Remote Controlled Operation: This maximizes efficiency while keeping the operator safe from harmful vibrations and dangerous areas. The Brokk allows the operator to be clear of the work face and does not require any manpower or exposure to hand arm vibration.

Three-arm System: A strong and flexible solution that allows for extraordinary reach and power in all directions, providing maximum precision and accuracy.

No Exhaust Fumes: less noise and less maintenance.

Compact and Manoeuvrable: easy to manoeuvre and easy to transport. Can get access through narrow spaces and climbs stairs.

Heat Resistant: From covers to cylinders and components, everything is heat and impact protected.

Range of Attachments: A whole range of attachments are available.

Active’s Brokk plant could help improve your efficiency levels and offers the ultimate when it comes to health and safety.

Three-arm System: A strong and flexible solution that allows for extraordinary reach and power in all directions, providing maximum precision and accuracy.

No Exhaust Fumes: less noise and less maintenance.

Compact and Manoeuvrable: easy to manoeuvre and easy to transport. Can get access through narrow spaces and climbs stairs.

Heat Resistant: From covers to cylinders and components, everything is heat and impact protected.

Range of Attachments: A whole range of attachments are available.

BROKK 100

Active’s Brokk 100 provides power for demolition and soft strip in tight areas such as plant rooms, corridors, voids, asbestos enclosures, lift motor rooms and lift pits. Its versatility allows the machine to climb staircases to work on different levels. Specifications:

Weight: 990 kg
Width min: 780 mm
Height min: 1147 mm
Power consumption: 0-15 kW
Max weight attachment: 150kg
Sound power level Lwa: 86 db (A)
Transport speed, max.: 2.5 km/h

The Brokk 100 provides as much power and versatility as possible at the workface. Its compact design, easy operation, unparalleled stability, and powerful tools make it perfect for use in a wide variety of residential, commercial and industrial environments. In particular where there are space constraints or load restrictions on floors, but maximum productivity is still needed.

BROKK 160

Active’s Brokk 160 has worked in a variety of environments such as staircases, basements, confined spaces, upper floor levels and rooftops. Its light weight allows the machine to work on standard concrete slabs to remove screeds and internal walls and security safes. Specifications:

Weight: 1600 kg
Width min: 780 mm
Height min: 1254 mm
Power consumption: 0-22 kW
Max weight attachment: 270 kg
Sound power level Lwa: 85.8 db (A)
Transport speed, max.: 2.1 km/h

BROKK 160

Weight: 1600 kg
Width min: 780 mm
Height min: 1254 mm
Power consumption: 0-22 kW
Max weight attachment: 270 kg
Sound power level Lwa: 85.8 db (A)
Transport speed, max.: 2.1 km/h

BROKK 170

Active’s Brokk 170 has performed at a number of sites breaking suspended and basement slabs and munching rooftop structures as well as progressively removing entire levels of a building.

Weight: 1600 kg
Width min: 780 mm
Height min: 1254 mm
Power consumption: 24 kW
Max weight attachment: 270 kg
Sound power level Lwa: 87 db (A)
Transport speed, max.: 2.1 km/h

The Brokk 170 is the ultimate demolition machine, the lightweight machine gives 15 % more power than the Brokk 160 with the breaker and powerful force with the muncher. It’s compact enough to get through standard door openings.

BROKK 500

Active’s Brokk 500 was lifted to the 7th floor of a central London building where it munched through the last above ground level helipad in the capital. Specifications:

Weight: 5200 kg
Width min: 1600 mm
Height min: 1792 mm
Power consumption: 0-38.5 kW
Max weight attachment: 700 kg
Sound power level Lwa: 100 db (A)
Transport speed, max.: 2.5 km/h

Please call for hire rates or lump sum project execution prices.

GET IN TOUCH

BROKK 500

Active’s Brokk 500 was lifted to the 7th floor of a central London building where it munched through the last above ground level helipad in the capital. Specifications:

Weight: 5200 kg
Width min: 1600 mm
Height min: 1792 mm
Power consumption: 0-38.5 kW
Max weight attachment: 700 kg
Sound power level Lwa: 100 db (A)
Transport speed, max.: 2.5 km/h